Procedure 20 KVA UPS fault reset.
Indication Lamp
If RED LIGHT- Fault
If GREEN LIGHT- RUN (Normal operation)
If In case Any faults occur on UPS Follow the bellow Steps
STEP 1: - Press F4 to turn on the display.
STEP 2: - If the red light is blinking and the alarm is ON then keep Pressing F4 till the event option appears.
STEP 3: - Check for the recent activity that has been displayed in the event option.
STEP 4: - Consider the following cases.
Case 1
"In bypass mode" Press the fault clear button for 3 to 4 seconds till the fault clear messages in displayed in the event after resetting it press the 'ON' button till the inverter gets ON.
Case 2
"Income fault" Press F1 to go to the home page keep pressing F3 to go back to the option main check for line-to-line & line to neutral voltage if it is proper then produces as case 1.
If there is no voltage check whether MCB is in the incoming sockets are in the ON position still if there is no incoming, then check for the respective Panel for the supply.
Click the Bellow Image & Download For Your Working time
Comment Your Opinion